How much does it cost to replace a bathtub faucet in Abbotsford?
$1,208.75
$1,935.00
RenoFiz estimated a bathtub faucet replacement in Abbotsford, BC at $950–$1,500 CAD for a leaking wall-mounted two-handle faucet with diverter. The estimate covers plumber labour, a contractor-supplied replacement faucet, water-shutoff coordination with condo management, full installation from the tub side (no rear access), pressure testing, silicone sealant, and disposal. Possible additional work: in-wall pipe repair ($1,200–$1,800) if supply connections are corroded.
Is this like your project?
Location
Abbotsford, BC
Property type
Condo (built 1990+)
Project
Replace leaking wall-mounted two-handle bathtub faucet with integrated diverter
Trade
Plumber ($145/hr)
Permit required
No — simple fixture swap with no supply line alterations
Where the $1,209 project cost goes
Where the $1,209 project cost goes
See the full cost breakdown for this project.
| Scope item | Labour | Materials | Total |
|---|---|---|---|
| Tub Protection and Site Prep | $72.50 | — | $72.50 |
| Water Supply Isolation and Coordination | $145.00 | — | $145.00 |
| Demo Existing Faucet Body | $108.75 | — | $108.75 |
| Thread Preparation and Inspection | $72.50 | — | $72.50 |
| Install New Faucet Assembly | $217.50 | $250.00 | $467.50 |
| Pressure Testing and Commissioning | $72.50 | — | $72.50 |
| Apply Silicone Flange Sealant | $72.50 | $25.00 | $97.50 |
| Debris Cleanup and Disposal | $72.50 | $100.00 | $172.50 |
| Complete base project cost | $833.75 | $375.00 | $1,208.75 |
Total Cost
$1,208.75
Possible extra
$1,935.00
On-site decisions or hidden conditions that could increase the scope.What's your home project?
Get an estimate, then choose to connect with pros
Things to know for your project
Things to know for your project
Conditions, constraints, and on-site decisions that shape the final project cost.
Corroded in-wall supply threads
Trigger: When the existing threaded water supply nipples behind the tile are corroded, stripped, or start leaking upon removal of the old faucet.
The plumber must cut into the tile wall from the front to replace the plumbing nipples, then patch the tile. Adds $1,200–$1,800 and extends the project by 1–2 days.
Building water shutoff complications
Trigger: When the condo building main isolation valve fails to fully shut off or leak by, preventing safe faucet disassembly at normal water pressure.
The plumber must coordinate a municipal street-side water shutoff with the city. Adds $325–$525 in coordination fees and additional labour.
Owner-supplied faucet (different procurement)
Trigger: If the homeowner chooses to buy the faucet themselves instead of having the contractor supply a standard replacement.
The material cost ($250 for a standard faucet in this estimate) is removed, but the homeowner is responsible for ensuring the new unit fits the existing wall-mount thread spacing. Labour cost stays the same.
Finish-grade or custom faucet upgrade
Trigger: If the homeowner selects a premium, designer, or specialty-wall-mount faucet beyond a contractor’s standard replacement unit.
Faucet material cost climbs from $250 to $400–$800+ depending on brand and finish. Plumber installation may take longer if the unit has unusual mounting hardware (+0.5 hrs, ~$75 additional labour).
The real conversation behind this estimate
The real conversation behind this estimate
This is the how RenoFiz gathered the facts and turned a simple request into a scoped estimate.
I need to fix my bathroom bathtub faucet. The faucet is leaking at the shower diverter.
Hi there! I'm Chris, your general contractor. Looking at the photo you provided, you have a classic wall-mounted two-handle bathtub faucet where the diverter is leaking.
To make sure we walk through this project correctly, I've identified the main scope item:
- Bathtub Faucet Repair or Replacement (Plumbing trade)
Since we are focusing on this single plumbing scope item, we need to make some key decisions about repairing versus replacing, understand the logistics of your home, and look at the existing conditions behind the wall to see how a plumber will access it.
Please answer the questions below so we can get a clearer picture of the job:
Question: What is your postal code so we can verify local context, permits, and pricing?
Question: Would you prefer to attempt a repair on the existing faucet (by replacing the diverter/cartridge parts), or would you prefer to replace the entire faucet assembly?
- Attempt repair on existing faucet
- Replace the entire faucet assembly
Question: Is there an access panel or closet on the opposite side of the wall behind the faucet, or is it solid wall?
- Yes, there is an access panel or closet behind the wall
- No, it is a solid wall with no rear access
- I don't know
Question: What type of property is this?
- Detached Single-Family House
- Condo or Apartment
- Townhouse
Question: Approximately what year was your home built?
- Before 1990
- 1990 or later
Question: If replacing the faucet, will you supply the new faucet yourself, or would you like the contractor to supply a standard replacement?
- I will supply the new faucet
- Contractor should supply a standard replacement
- I'm not replacing the faucet (only repairing)
Photos that would help
To help verify the setup and ensure we provide an accurate estimate, please share:
- A close-up photo of the faucet from underneath and from the side. This helps us identify any brand markings or the exact connection style to the wall.
- A photo of the access panel or wall directly behind the tub faucet (usually in an adjacent closet, hallway, or bedroom), if one exists.
- An overview photo of the entire bathtub/shower enclosure.
What is your postal code so we can verify local context, permits, and pricing?: V2S
Would you prefer to attempt a repair on the existing faucet (by replacing the diverter/cartridge parts), or would you prefer to replace the entire faucet assembly?: Replace the entire faucet assembly
Is there an access panel or closet on the opposite side of the wall behind the faucet, or is it solid wall?: No, it is a solid wall with no rear access
What type of property is this?: Condo or Apartment
Approximately what year was your home built?: 1990 or later
If replacing the faucet, will you supply the new faucet yourself, or would you like the contractor to supply a standard replacement?: Contractor should supply a standard replacement
Your project estimate
Project summary
The client is requesting a full replacement of a leaking wall-mounted two-handle tub faucet with an integrated diverter spout in a condo unit. Since there is no rear access through the solid wall, the work will be performed entirely from the front (tub side), assuming the existing wall supply nipples and threads are in good, reusable condition. A standard faucet unit will be contractor-supplied, and a licensed plumber will coordinate with strata/building management for any necessary water shutdown.
Estimate range
$950 - $1,500 This is a starting ballpark, not a final price.
Estimated work
| Item | Details | Range |
|---|---|---|
| Tub Protection and Site Prep | PREP bathtub surface and surrounding tiled work area using heavy-duty protective drop cloths and padding to prevent scratches or impact damage during demolition and installation. | $55 - $90 |
| Water Supply Isolation and Coordination | COORDINATE with condo management to isolate water riser and SHUT OFF the main water supply to the suite. Drain down the lines to prepare for faucet removal. | $100 - $175 |
| Demo Existing Faucet Body | DEMO and carefully disconnect the existing wall-mounted two-handle faucet body from the supply nipples behind the wall, ensuring the existing copper threads are preserved. | $75 - $150 |
| Thread Preparation and Inspection | PREP, clean, and re-tape the existing threaded supply connections, verifying their structural integrity for the new installation. | $55 - $90 |
| Install New Faucet Assembly | SUPPLY and INSTALL new contractor-supplied standard wall-mount two-handle tub faucet assembly with integrated diverter onto prepared connections. | $350 - $575 |
| Pressure Testing and Commissioning | TEST system by restoring water pressure, checking all connections for minor leaks, and verifying flow and proper diverter operation. | $55 - $90 |
| Apply Silicone Flange Sealant | APPLY a fresh bead of premium, mildew-resistant silicone sealant around the decorative wall flanges where they meet the existing wall tile. | $75 - $120 |
| Debris Cleanup and Disposal | CLEAN UP the workspace, pack out tools, and DISPOSE of the old faucet assembly and packaging. | $125 - $225 |
Cost summary
| Category | Range |
|---|---|
| Materials | $300 - $450 |
| Labour | $650 - $1,050 |
| Total | $950 - $1,500 |
What is included
- Protect the bathtub surface and surrounding work area.
- Shut off the water supply, using either the in-suite main shutoff valve or coordinating a building-wide water shutdown with condo management.
- Carefully disconnect and remove the old wall-mount faucet body from the supply nipples coming through the tile, ensuring existing threads are not damaged.
- Prepare the existing threaded supply connections, verifying their integrity and cleaning threads.
- Install the new contractor-supplied standard wall-mount two-handle tub faucet assembly with integrated diverter.
- Turn on the water supply, thoroughly pressure test all connections for leaks, and verify proper diverter and flow operation.
- Apply a bead of clean, mildew-resistant silicone sealant around the wall flanges where they meet the tiles to prevent water intrusion.
- Clean up the workspace and dispose of the old faucet assembly.
Possible add-ons
These items are not included in the estimate range above. They may change after an on-site review.
| Item | Trade | Possible range | What would confirm it |
|---|---|---|---|
| DEMO tile, REPLACE damaged in-wall plumbing threads/nipples, and RE-TILE affected area if existing supply pipes are structurally compromised. | Plumber | $1,200 - $1,800 | Existing threaded water supply connections behind tile are corroded, stripped, or leak upon removal of old faucet, requiring in-wall access. |
| COORDINATE municipal street-side water shutoff if strata building zone valves fail to isolate water supply completely. | Plumber | $325 - $525 | Condo building main isolation valve leaks by, preventing line pressure drop required for safe faucet disassembly. |
You can keep chatting to ask questions or adjust the project — and when you're ready, a real professional will confirm the details and discuss final pricing with you, typically after seeing the space in person.
The Request a Pro button is now active — press it to connect with a local contractor for an on-site visit and firm quote.
View Other Estimates
View Other Estimates
See other projects in Abbotsford or in related trades.